Thailand Mould & Environmental Inspection, Testing,
Removal, Remediation, Prevention & Training Services

www.envirothai.com

ตรวจสอบแม่พิมพ์ไทยสารพิษและตรวจสอบ
 


Mold  Advice Books
 

Read mould expert Phillip Fry's suggestions for eradicating Hong Kong mold, as published in
Hong Kong's South China Morning Post
on April 16, 2010


EnviroFry Offers Thailand Do-Your-Own Mould Tests
with Tape Lift Sampling, Pictures, & Lab Report


“Homeowners, other property owners, managers, and tenants in Bangkok, Samut Prakan, Mueang Nonthaburi, Udon Thani, Chon Buri, Nakhon Ratchasima, Chiang Mai, Hai Yat, Pak Kret, Si Racha, Phra Pradaeng, Lampung, Mae Sot, and elsewhere in Thailand, can now identify and quantify at low cost the toxic mould species types that may be infesting their buildings by using the do-it-yourself EnviroFry Scotch Tape Lift Sampling & Mould Pictures Testing Protocol,” announces EnviroFry co-manager  Phillip Fry.

Fry is a Certified Environmental Hygienist, Professional Industrial Hygienist, Certified Environmental Inspector, Certified Remediation Specialist, Certified Mold Inspector, Certified Mold Remediator, Certified Air Duct Cleaning Specialist, and webmaster of www.envirothai.com and
www.thailandfloodmold.com.

The do your own mould testing protocol includes these steps:

1. Lift Tape Sampling

The property owner, manager, or tenant uses inexpensive, clear, transparent, sticky, one inch (2.54 cm) wide adhesive tape, such as Scotch® brand or similar tape that is cut into three inch (7.6 cm) long strips to collect the mould samples.  Complete Scotch tape lift sampling instructions are provided at
www.moldexpertconsultants.com/diy_mold_testing.htm.

Scotch tape lift sampling is an easy, inexpensive, and effective way to do mould sampling in Thailand when a person---  

(a) Sees mould growing on a wall, ceiling, floor, carpeting, furniture, heating/cooling duct register, or other surface;

(b) Wants to know whether a particular stain, discoloration, growth, or mystery substance on the wall or another surface is actually toxic mould;

(c) Smells possible mould
odors (caused by the digestive gas emitted by mould eating the home, building, or contents) and wants to test a number of surfaces upon which elevated levels of airborne mould spores may have landed or been deposited, such as on walls, window sills, window and door trim, refrigerator top, kitchen cabinet tops, undusted furniture, heating/cooling duct registers, and the return air filter in the heating/cooling system; and/or

(d) Wants to test the inside walls of heating/cooling ducts for the possible presence of elevated levels of mould spores.

2. Take and Submit Pictures of Water Damage and Mould Growth

To supplement the collected lift tape samples, the property owner, manager, or tenant takes close up pictures with a smart cell phone or digital camera of any visible building water damage or mould growth, as well as pictures of the entire building, room, and areas from which the close up photographs were taken.

3. Send Lift Tape Samples and Mould Pictures to Mould Expert Phillip Fry for Lab Analysis and Fry’s Written Report Analyzing the Lab Results and Pictures

Up to three different collected lift tape samples (or alternatively, 2 inch by 2 inch physical samples of the actual mould growth itself as cut from mould-infested building materials or other surfaces such as carpeting), along with the lab “chain of custody form” available at
www.moldexpertconsultants.com/diy_mold_testing.htm,  are then mailed (or sent via FedEx or an alternate delivery service) to EnviroFry, 10104 Sheridan Rd., Montrose, Michigan 48457, USA, along with the a check or money order for U.S. $200 payable to EnviroFry, or, alternatively, credit or debit card payment by sending money via www.paypal.com to the PayPal email payment address of phil@moldinspector.com.

Each additional lift tape sampling or physical mould sampling above the first three is only U.S. $35.00 per sampling to be lab analyzed.

Mould, building, and room or area pictures, along with a detailed description of any known building water leaks and flooding history or mould damage problems, should be sent either as actual photographs to the company address, or, preferably, as email attachments to
phil@moldinspector.com.

Within five business days after EnviroFry’s receipt of the lift tape samplings and the mould pictures, Phillip Fry will provide via email: (a) the mould lab results from an expert USA mould analysis lab accredited as an American Industrial Hygienists Association EMPAT Laboratory; (b) Fry’s written analysis, opinion, and report as to the extent and severity of the mould infestation, as evidenced in the submitted samples and mould pictures; (c) Fry’s specific suggestions on how any discovered mould problem can be removed and remediated effectively, safely, and affordably.

Read Fry’s recommended ten steps for effective mould removal at
www.moldinspector.com/mold_removal.htm.

For more information about the EnviroFry Scotch Tape Lift Sampling & Mould Pictures Testing Protocol, please email Phillip Fry
phil@moldinspector.com or phone U.S.A. 1-810-639-0523 or cell-phone 1-480-310-7970, and visit www.moldexpertconsultants.com and the mold inspector directory www.certifiedmoldinspectors.com.

To be trained and certified as a Certified Mold Inspector and Certified Mold Remediator, visit www.ecology-college.com.

 

Links to Helpful Environmental and Health Websites
 
Visit these environmental and health websites for valuable insights and help.

Helpful Environmental & Health Websites
| Mold Attorney | Caribbean Mold InspectionCertified Hygienists DirectoryCertified Mold Inspectors Directory | Condominium Mold Inspection | Environmental ProductsEnvironmental Hygienist Training | Factory Mould Inspection |Government Building Mold InspectionHospital Mold InspectionHotel Mold Inspection | Inspector Del MoldeLos Angeles Mold Inspection | |Miami Mold TestingMold Inspector Training | Mold Inspection | Mold Inspector | Mold Inspector Training | Mold Products and Services |Mold School | Mold TrainingMold Training And Certification | Office Mold Inspection | Orange County Mold InspectionPublic Building Mold Inspection | Sacramento Mold Inspection | San Diego Home Inspection | San Diego Mold Inspection | San Francisco Mold Inspection | San Jose Mold Inspection | School Mold Inspection | Senior Housing Mold Inspection |Store Mold InspectionToxic Mold Inspection | Toxic Mold Inspector |
Warehouse Mold Inspection |  China Mould Testing | Air Conditioning Mold | Mold Test Kits | Ozone Blasting | Ozone Generator | Household Mold Removal | Workplace Mold | Mold Health | Mold Remediation Safety Gear Home Repair |  Home Renovation | Home Remodeling |

[Home] [Contact Us] [Thai Mold Q & A] [Environmental-Website-Links]
 


 


Mold Cleaner
 

Read Phillip Fry's suggestions for eradicating Hong Kong mold, as published in Hong Kong's South China Morning Post on April 16, 2010

Environmental Health Websites
Mold Health Information:  http://www.moldinspector.com
Mold Inspector Directory http://www.certifiedmoldinspectors.com
Mold Removal http://www.moldmart.net 
Mold Training http://www.ecology-college.com
Environmental Hygienists http://www.certifiedhygienists.com
Allergy, Asthma, & Sinusitis http://www.allergy-asthma-sinusitis.com
Hong Kong Mould http://www.envirohongkong.com
Singapore Mould http://www.envirosingapore.com
Malaysia Mould http://www.enviromalaysia.net
Thailand Mould http://www.envirothai.com
China Mould Inspection http://www.chinamouldtesting.com
Air Conditioning Mold http://www.airconditioner.com
Workplace Mold: http://www.workplacemold.com
Ozone Generator: http://www.ozonegeneratorkillsmold.com


Thailand Flood Mold  15 Steps To Do Your Own Household Mold Removal  Mould Test Kits  Indoor Pollution
Kill Mould with Ozone Generator PollutionBusters  Workplace Mould  Home Repair  Home Remodeling
China Mould Inspection   Air Conditioning Mould  Mould Inspection  Mould Health  Mould Remediation  Mold Expert
Tim-Bor Professional  Company Mold  Business Mold  Singapore Mold Inspection
FREE Mold Advice Hotline